Saturday, November 12, 2016

Steps In Doing The Chimney Cleaning

Share on :
By Christine Scott


A chimney is a type of a structure which will provide ventilation from smoke or flue gases which are coming from fireplaces, furnaces, stoves, or boilers into an atmosphere outside the house. Typically, these structures are vertical in position in order to ensure that the gases will be flowing upwards in a smooth manner. The flue is a space located inside the chimneys. A chimney is often used in most ships, buildings, and steam locomotives.

There are times when burning fires are not avoided from a chimney and these usually cause a fire because of those some substances that are sticky and flammable like creosote and soot. Doing the chimney cleaning Windsor Locks CT is done not only by hiring some professionals but may be done also through doing it by yourself. This article will be giving you the steps in doing it in a simple way.

These steps involve four different methods. First is to prepare for cleaning. But before starting the process, determine first whether the chimney would really need this process for cleaning. The most typical time for the chimneys to be cleaned is once a year. Frequent use of it often gets it dirty, so to clean it regularly is needed. Due to being dormant may be for a while, some animals may have been nesting in it so better check it.

The next step is measuring its flue. If you are doing all the methods for cleaning, see to it that you are making use of the appropriate tools and these have to be in appropriate sizes to fit the flue. All sides of the fireplace and also up to the top part must be measure properly. There are some hardware stores in your local place where in you can purchase the needed materials.

You must also dress appropriately. You may use your old clothes so that you will not mind on getting messy because of the soot. A bandanna can be used for covering the hair. Use gloves for protecting the hands and goggles for the eyes. Place the drop cloth or the plastic tarp on the floor to avoid the house from getting dirty. Look for the damper then clean it with the brush.

Second is to start cleaning the top then down to the bottom part. You need first to set up the ladder to be used in climbing the roof. You may also set up your ladder outside the house and lean it into house, but be sure that it is safe. So start by assembling the pipe section and brush to scrub the flue. The pipe may be added with many sections as the extensions for the brush.

Third is cleaning from bottom to the top. The same steps will apply when using pipe sections and a brush for flue scrubbing. Then after those steps, clean from bottom then to the top by the use of a pulley system together with brush. Place the pulley on top of the roof.

During this step, you need someone in helping you hold the rope and dropping it, from which the brush is being attached to the center. Then together, work by utilizing the ropes by pulling the rope up and down. By this, the brush will be scrubbing a chimneys flue.

Lastly is removing dirt from flue entrance using the shovel and the spade. Reattach then the damper handle that was removed in the first method. A drop cloth or a plastic tarp may obtain debris, us a dustpan and a broom to clean it.




About the Author:



0 comments:

Post a Comment

 
Related Posts Plugin for WordPress, Blogger...